Posts

Nation’s Top MOB Markets Include Texas And The Midwest, And They Just Keep Growing

/in , /by

Medical office buildings have proven to be a resilient asset class through the pandemic.

That’s because most tenants require these spaces to treat patients in person, providing a more stable tenant base for the asset class. And yet, these buildings are in short supply across the U.S.

Why? The buildings are more complicated to operate than a traditional office space—and more complicated to build—but investment in these facilities is growing, especially in Texas and the Midwest.

Using data provided by CRE research and listing platform CommercialEdge, 42Floors looked at the 25 biggest CRE markets across the U.S. and analyzed MOB construction activity between 2012 and 2021 to see how the asset class has gained interest for investment firms.

Overall, the top 25 medical office space markets in the U.S. grew 13% since 2012, adding more than 52.7 million square feet. Breaking it down, Los Angeles led the country for MOB square footage with more than 1,000 MOBs totaling more than 41 million square feet, which is far more than any other single market in the country, according to 42Floors.

That said, Houston ranked the second-largest MOB market in the U.S., which added 4.3 million square feet of medical office space over the decade, growing 15% to its current total of just over 33 million square feet. Dallas-Fort Worth, too, saw similar growth, based on the report, landing next on the list, adding 4.6 million square feet to its current 33-million-square-foot medical office footprint—16% growth since 2012.

Lower-tier markets with aging populations also saw some of the most growth during the decade, based on the report, like the Twin Cities. Minneapolis-St. Paul ranked No. 15 in the U.S. with 231 buildings totaling nearly 16 million square feet but has grown 24% in the last 10 years, adding three million square feet. That’s almost as much as was added in Los Angeles during the same period, which can be attributed to the city’s always-expanding 65-and-older demographic.

Finally, 42Floors found that Chicago’s market consisted of 28.8 million square feet across 427 buildings—the fourth largest MOB market. Chicago added more than 4.3 million square feet of medical office space and experienced 18% growth since 2012.

As for current developments in the Midwest, Chicago, Madison, Wis.; and Milwaukee will see three large projects delivered within the next two years:

• Chicago’s Joan & Paul Rubschlager Building at Rush (480,000 square feet) will be completed in Q3 of 2022;

• The Eastpark Medical Center in Madison (469,000 square feet) will be completed in Q1 of 2024;

• ThriveOn King in Milwaukee (455,000 square feet) will be completed in Q4 of 2023.

These three buildings will add more than 1.4 million square feet of medical office space to the region, based on the report.

 

Source: RE Journals

Trends And Challenges To Watch In Post-Pandemic Health-Care Construction

/0 Comments/in , , /by

A year ago, predictions indicated a spike in health-care construction planning and development across the country.

However, the post-COVID-19 shift is trending away from the traditional model to an emphasis on outpatient care to offload pressure from hospitals’ main campuses, according to Richard Simone, CEO & president of Central Consulting & Contracting, a construction management and general contracting company that specializes in health-care facilities.

In an interview with Commercial Property Executive, Simone explains why health-care construction is trending toward smaller outpatient care facilities and clinics and discusses challenges within the sector.

CPE: How has the initial health-care construction model changed since the onset of the pandemic? 

Richard Simone: The factors causing changes in health-care construction are largely due to labor shortages, limited or slow-to-get resources and new operational requirements. Since the start of the pandemic, we continue to do more tracking of workers and data logs on construction sites. For example, we’ve implemented contact tracing logs of when workers enter and exit work sites, temperature checks, cleaning logs, social distancing, no gathering for breaks etc., some of which affects the length of time now needed to complete certain projects.

Also, supply chain issues with closed factories due to COVID-19 have affected completion times and many of the issues persist as manufacturing struggles to keep up with demand, and attract and retain the workers required.

During the height of the pandemic, we saw the need for rapid deployment of resources to build emergency bed units on very short notice, which required a total integrated project delivery approach. Because of the speed in which it was done and the necessary collaboration, we are starting to see more property owners and project decision makers who want to explore this delivery method on their regular projects, not just emergency.

CPE: What is fueling change in health-care construction?

Richard Simone: Projects that were on hold during the pandemic now need to get online as quickly as possible. As such, clients are considering ways to speed up the process via design assist, design build and/or off-site manufacturing. While these options have been around for a fairly long time, adoption has accelerated due to their proven efficacy during the pandemic.

In terms of COVID-19-influenced design, where possible, hospitals are considering the creation of a mass casualty incident entrance at the emergency department. Basically, adding a third entrance to the ED, in addition to the regular walk-in and ambulance entrances, would allow patients to be quickly triaged and separated, moving infected patients into the MCI/COVID-19 unit.

Also, the redesign of waiting areas has increased to allow for social distancing, more room between chairs, low-height walls with glass separation panels, more compartmentalization and minimal wait times. There are also design changes happening in ways most lay people can’t see, such as catering to the need to add more ability or flexibility to change air flows to decrease the spread of future viruses. Many health-care systems now require larger, more robust, high-efficiency particulate air filtration systems, with MERV 16-level protection which captures more than 95 percent of particles within a specified range.

CPE: What types of health-care facilities are we starting to see more often and why? 

Richard Simone: We are starting to see much more activity for behavioral health facilities. Before the pandemic, there was a great need and after the pandemic there will be an even greater need. Substance abuse has been on the rise since the pandemic, as COVID-19 and post-COVID-19 anxieties are all real issues many people are dealing with. Treating patients with behavioral and mental health needs requires a long-term solution that incorporates brick-and-mortar and telehealth-equipped facilities.

Micro-hospitals—whereby health-care systems are bringing health care closer to its more remote patients in, for example, rural areas—is a rising trend as well.

CPE: Are these impacting main campus hospitals in any way? 

Richard Simone: The rise in micro-hospitals and specialty centers is not impacting main campuses negatively, but rather, they are filling a very important need by supplementing main campus care and reach by providing the support and specialty care that patients need.

CPE: What about telemedicine-influenced spaces? Will these be integrated into construction? 

Richard Simone: We are not seeing a significant increase in telehealth spaces yet, as many facilities are using existing spaces for this purpose. I think specific spaces will need to be designed and built in the future, especially given the fact the 2022 guidelines for design and construction will incorporate specific acoustical treatment requirements for noise reduction, interior noise and speech privacy for telehealth spaces. I believe future design will have to consider telehealth-specific spaces, disbursed throughout the facility, with easy access for doctors and staff.

CPE: What are the infrastructure and operational considerations developers should take into account when building health-care facilities in a post-COVID-19 world?

Richard Simone: Considerations should focus on flexibility, including the ability to quickly change HVAC systems from positive to negative and vice-versa. Developers should also efficiently design in possible surge capacities, which would require the ability to quickly change private patient rooms to semi-private and the option to add more patient beds in urgent cares, ICUs and ED settings.

CPE: What can you tell us about the challenges arising in health-care construction?

Richard Simone: Many health-care systems and facilities suffered a tremendous financial impact over the past 15 months, and as a result, several projects are still on hold. The challenge is getting the systems back to feeling financially stable to get back to planning and building.

CPE: How do you see the sector going forward? 

Richard Simone: We still believe the health-care sector is the strongest market, with the greatest short-term and long-term growth potential. It appears to be rebounding quicker than other sectors. Although not as quick as we hoped, it shows signs of coming back stronger than before.

I believe the government—federal and state—has realized how fragile and out-of-date some of our health-care infrastructures are, and they will make the dollars available for hospitals to expand, upgrade and, in some cases, build replacement hospitals.

CPE: Are there any other trends we should keep an eye on? 

Richard Simone: Not a positive trend, but certainly impactful, is the challenge regarding the shrinking availability of skilled labor, as a large bulk of the workforce is aging and there is a lack of a new generation interested in learning the trade.

 

Source: CPE